Le Groupe Lafreniere Tracteurs

Information

2023 Great Plains 2N-2410 & 2N-3010 2N-2410

The field-proven 24' and 30' Pull-Type Drills from Great Plains are designed and built to handle the toughest no-till conditions. Featuring the Great Plains 10 Series opener and coulter combination, these two-section drills precisely place seed in the bottom of the seed trench for maximum emergence.

The direct link press wheel provides accurate depth control with 18 different depth settings, adjusted in 1/8" increments.The 2.1 bu./ft. seed box minimizes fill time while maximizing productivity. Plus, the drill’s wide, stable walkboard offers added convenience while filling. These units come standard with point-row clutches, allowing the operator to seed with one half of the drill width to save seed costs.

Options on these no-till drills include Keeton® seed firmers, a shaft monitor, flat-fold marker, seed box agitator, and two-bar coil tine harrow.

• This system splits no-till seeding into two operations: penetration and seed placement. Preloaded at 450 lbs., coulters get the job done by working at the desired depth, ensuring optimum seed placement for a uniform stand. Increase coulter depth to penetrate hard, dry soils, or reduce coulter depth in soft conditions. This allows the 10 Series parallel linkage double-disc openers to properly place the seed. Seeding depth is set by the 18-position T-handle at the rear of the opener.

• Shuts off drill sections for point-row seeding.

• Fold and unfold electro-hydraulically from the tractor seat! Calibrate easily and accurately with the 4-speed gearbox and adjustable powdered metal flutes, which are gentle, yet tough enough to stand up to abrasive seeds. Conveniently grease hard-to-reach coulter pivots with grease banks on each wing to eliminate premature wear.

• Eight skid steer tires help keep this beefy no-till drill on top of the ground and provide added protection against tire damage from BT corn stalks and other field hazards.

• Choose between a wide ¾" wavy blade, a 5/8" Turbo coulter blade that is aggressive and prepares a mini seedbed ahead of the opener, or a 5/16" fluted coulter blade that penetrates easily to perform minimum tillage.

• Single press wheel choices include 3"x13" center rib, or a 2"x13" smooth. 1"x12" double-V press wheels are also an option.